Mahlkönig 130 mm Special Steel Burrs – DK15 LS
The DK15 LS is built for very high throughput, and its 130 mm burrs made from hardened special steel (64–66 HRC) have a clever trick built in: each side carries its own tooth geometry. Once one side is worn, you simply flip the burr 180° and keep grinding with the second side.
That doubles the usable service life to around 10 to 15 tonnes per side, at a grinding capacity of up to 200 kg per hour – from espresso to French press. As a partner of Mahlkönig, we carry these original burrs for you.
At a Glance
| Diameter |
130 mm |
| Material |
hardened special steel, 64–66 HRC |
| Special feature |
reversible (180°), own tooth geometry per side |
| Grinding capacity |
up to 200 kg/hr. |
| Service life |
around 10–15 tonnes per side |
| Compatibility |
Mahlkönig DK15 LS |
Compatibility
Original replacement burrs for the Mahlkönig DK15 LS. When installing, pay attention to the correct alignment so both sides remain usable later.
Frequently Asked Questions
What does “reversible” mean for the DK15 burr?
Each side of the burr has its own tooth geometry. Once one side is worn, you flip the burr 180° and keep using the second side, doubling service life to around 10 to 15 tonnes per side.
What volumes is the DK15 LS designed for with this burr?
For very high throughput up to around 200 kg per hour, from espresso to French press.
Does the change require a specialist?
For a grinder of this size, most businesses recommend a technical specialist for the change. We're happy to support you with questions about the process.
Discover more Mahlkönig spare parts and burrs, matching coffee grinders for roasteries and large operations, or let our advisory tool guide you.
